TOS6210菊水地線導通測試儀/接地電阻測試儀
采用恒定電流方式
采用視窗比較方式進行鑒別
可控制利用GPIB、RS232C等外部傳輸電流、時間、電阻值
可讀回GPIB、RS232C測試值、試驗結果
可搭載100個內存功能和程序功能
設有接觸校驗功能
設有容易準確判斷狀態的大型顯示屏幕
可鑒別電阻值 電壓下降
可行UL60950-1的40A/60A試驗
TOS6210是一款不僅能符合IEC、EN、VDE、BS、UL、JIS等**標準的要求，而且還可適用信息處理設備（ITE）標準UL60950-1的地線導通測試儀
其沿用了傳統產品（TOS6200）的基本性能和各類功能，并將*大試驗電流擴展到符合30A標準要求的60A。同時，還可對標準要求的電壓下降做出判定。
While inheriting the basic performance and functions of its predecessor (TOS6200), such as a constant current driving system that provides current waveforms with little skew and high measurement accuracy, the TOS6210 tester extends the maximum test current from 30 A to 60 A, which is demanded by the new standard.
In addition, the tester also lets you judge the acceptability of the device under test based on the drop in voltage, as required in the standard. What's more, you can preset test conditions of up to 20 different types of safety standards, such as those for information technology equipment, home appliances, medical devices, and measuring instruments, in the memory on the main unit's panel.
A simple memory call operation allows you to set up a protective earthling or protective bonding continuity test as stipulated in UL60950-1 and other relevant specifications including IEC and JIS standards.
The tester also features a set of functions that meet the specific needs of testing personnel, such as an offset cancellation function and a memo function that allows you to input calibration dates, production numbers, and other test-related information and read the input information later via the GPIB or RS-232C interface.
特性：
采用恒定電流方式
采用視窗比較方式進行鑒別
可控制利用GPIB、RS232C等外部傳輸電流、時間、電阻值
可讀回GPIB、RS232C測試值、試驗結果
可搭載100個內存功能和程序功能
設有接觸校驗功能
設有容易準確判斷狀態的大型顯示屏幕
可鑒別電阻值 電壓下降
Features
- Test current value: 6 to 60 A AC / Resistance value: 0.001 to 0.600 ohm
- Voltage drop-based judgment function
- Offset cancelling function
- Stores 100 test conditions in memory
- Incorporates test conditions into program
- Contact Check function
- Equipped with standard GPIB and RS-232C interfaces
- Equipped with standard test lead (TL12-TOS)
